If your xPad is not responding or the battery is low, follow these steps to replace the AAA batteries correctly:
- Remove the back cover: Use the Keypad ejector tool to remove the back cover of the xPad by inserting the pin into the designated hole at the bottom of the device. Apply gentle pressure to release the back cover.
- Remove the old batteries: Open the battery compartment cover and remove the old batteries.
- Insert new batteries:
- Ensure the positive (+) and negative (-) terminals match the markings inside the compartment.
- Insert the batteries firmly into place.
- Confirm power-up:
- The xPad will emit a beep to confirm the batteries have been installed correctly.
- Double-check the polarity and ensure the batteries are properly seated if no sound is heard.
- Secure the back cover: Align the cover with the xPad and press on the cover until it clicks.
For additional topics, you can refer to the Troubleshooting article.
