How to install Euro Profile Smart Lock – Step by step
BLACK X Smart locks provide enhanced security and convenience, allowing you to control access to your home or office with ease. Whether you’re upgrading an existing lock or installing a new one, this guide will walk you through the process of installing a Euro Profile Smart Lock efficiently and correctly.
By following these step-by-step instructions, you’ll ensure a secure and hassle-free installation. Let’s get started!
Step 1: Unbox and prepare components:
Open the packages and identify all components. Lay them out for easy access.
Hardware components:
1x BLACK X Euro Profile Smart Lock
1x Euro profile door cylinder
Box 1:
2x Mechanical keys
1x CR2 3V battery
1x Allen key
1x Cylinder screw
Box 2:
1x Extra Grip External Knob
1x Extra Grip Internal Knob
Step 2: Removing the old cylinder:
Locate the Mortise Plate: Identify this plate on the door’s edge where the door meets the frame.
Unscrew the Cylinder: Locate the screw on the mortise plate that secures the cylinder. Use a suitable screwdriver to carefully unscrew and keep the screw safely for later use.
Step 3: Extracting the Cylinder:
Insert the Key: Fully insert the original key into the cylinder.
Align the Cam: Rotate the key to align the cam with the body of the cylinder, ensuring it can be removed.
Remove the Cylinder: With the cam properly aligned, gently pull the cylinder out from its housing.
Note: If you encounter resistance, recheck the cam alignment.
Step 4: Prepare for new cylinder installation
Disassemble the Knob: Use the provided Allen key to loosen and remove the screw securing the knob. Carefully detach the knob from its base.
Prepare the Cylinder: Ensure the new cylinder body is properly aligned with Cam 1 and Knob Housing 2. Rotate the cylinder as shown in the video to achieve the correct orientation for seamless integration into the lock mechanism.
Note: Incorrect alignment may prevent proper integration into the lock mechanism.
Step 5: Installing the New Cylinder:
Position the New Cylinder: Insert the new cylinder into its designated position in the door, ensuring proper alignment.
Secure the Cylinder: Use the provided M5 steel screw or the existing cylinder screw. Hand-tighten it first, then use a Phillips-head screwdriver for final tightening.
Note: Do not over-tighten to avoid damage.
Step 6: Identifying gear positioning:
The smart lock is installed on the inner side of the door.
Gear Positioning:
If installed on the right side, the gear should face green.
If installed on the left side, the gear should face red.
Flipping the Gear (if needed):
Remove the gear holder.
Flip the gear if necessary to match the correct indicator position.
Reattach the gear holder securely until final removal in Stage 10.
Note: The gear holder is a temporary support to prevent the gear from falling during installation. It will be removed in step 10.
Step 7: Installing the CR2 Battery
Use a flathead screwdriver to open the dual-function battery compartment cover. Turn it half a turn, then press down on the latch to release the compartment.
Insert the battery release tab into the lock, then place the CR2 battery into the BLACK X device, ensuring the positive (+) and negative (-) ends align with the symbols on the battery pull tab. A beep will confirm the device is operational.
Return the battery compartment cover to its original position with the tab facing outward from the lock. Use the flathead screwdriver to turn the screw back to its locked position.
Note: Ensure that the pull tab is fully inserted into the battery compartment.
Step 8: Pairing with the BLACK X App
Ensure your phone’s Bluetooth and Wi-Fi are enabled before attempting to pair.
Download BLACK X App from App store or google play.
Open the BLACK X App.
click on ‘install a new lock’.
Name Your Lock or choose a description.
Create a ‘Home’ to associate with your lock.
Choose the ‘Home’ for your lock.
While in “Discovering Nearby Locks” mode, use the Allen key to press the connect button on the BLACK X device.
When a pop-up for the correct lock appears, click “Connect” to proceed.
Congratulations! You’ve successfully connected your first lock.
Step 9: Attaching the BLACK X Device
Prepare for mounting: Before mounting the device, use the supplied Allen key to partially loosen the screws on both the left and right sides of the BLACK X device until they are no longer visible from the inside. This ensures proper positioning for installation.
Mounting the Device: Remove the gear holder, as it is no longer needed, and dispose of it. Carefully align and insert the BLACK X device onto the cylinder, twisting it until it securely locks in place. You should hear a ‘click’ when the device is properly positioned. Ensure there is no looseness or movement between the device and the cylinder.
Secure the Device: Use the supplied Allen key to partially tighten the screws on the left and right sides of the BLACK X device, ensuring it is loosely attached but still adjustable. Note: Avoid overtightening at this stage to allow proper alignment of all components.
Mount the external knob: Align the knob with the hole facing upward, then rotate the knob body until it aligns properly. Use the provided Allen key to tighten the screw on the top. Note: Ensure the knob is fully aligned with the holes; if not, the Allen key may turn without securing it properly.
Fully secure the device: Once the knob is correctly mounted, return to the screws on the left and right sides of the BLACK X device and firmly tighten them using the Allen key. Note: Exercise caution to avoid overtightening, as this may cause the opening mechanism to become jammed.
How to install USA Deadbolt Smart Lock – Step by step
BLACK X Smart locks provide enhanced security and convenience, allowing you to control access to your home or office with ease. Whether you’re upgrading an existing lock or installing a new one, this guide will walk you through the process of installing a USA deadbolt smart lock efficiently and correctly.
By following these step-by-step instructions, you’ll ensure a secure and hassle-free installation. Let’s get started!
Step 1: Unbox and prepare components:
Open the packages and identify all components. Lay them out for easy access.
Hardware components:
1X BLACK X deadbolt
2X mechanical key
Box 1:
1x CR2 3V battery
1x Allen key
1x screwdriver
Box 2:
1 x Mounting Plate: 2.75″ x 1.13″ (7 mm x 28.7 mm)
1x bolt extension cover
4x M5 x 1″ (25mm) Screws
Step 2: loosen the screws
Use the provided Allen wrench and insert it into the screw socket as demonstrated in the video.
Turn the Allen wrench counterclockwise to loosen the screw.
Repeat the same process for the screw on the opposite side.
Step 3: disassemble the BLACK X mechanism
Rotate the BLACK X mechanism counterclockwise to loosen the body.
Carefully separate the mechanism body and the ratchet housing, as demonstrated in the illustration.
Step 4: Remove the Fasteners
Insert the screwdriver into the designated fastener slots.
Rotate the screwdriver to loosen and remove the fasteners from the component.
Once the fasteners are removed, gently detach the components, following the directions demonstrated in the video, to fully separate the lock for assembly preparation.
Step 5: Extracting the existing Cylinder:
Use a screwdriver to remove the screws that secure the existing cylinder in place.
Carefully pull the cylinder out of the mechanism.
Measure the distance from the center of the lock to the edge of the door.
Step 6: Determine the Correct Fit for the BLACK X Deadbolt
Choose the appropriate cylinder length based on your measurement from the previous step:
2.36” (60mm) Pre-set from the factory or 2.75” (70mm), Refer to the diagram for a clear comparison of the two sizes.
Refer to the diagram for a clear comparison of the two sizes.
Step 7: Install the Cylinder
Start with section 1 for the 2.75” (70mm) cylinder installation or Section 2 for the 2.36” (60mm) cylinder installation.
Insert the Allen key into the designated screw slot and pull the bolt sleeve outward to extend the cylinder length.
Use a screwdriver to rotate and pop the bolt face plate and bolt extension cover.
Loosen the bolt extension cover with the Allen key and carefully remove it.
Use a screwdriver to rotate and reinsert the base into its original position.
Use the screwdriver to slightly extract the metal pin outward to align it with the internal locking component, as shown in the illustration.
Slide the bolt component in the direction indicated in the illustration to ensure smooth movement.
Insert the cylinder into the lock housing on the door, aligning it with the holes.
Secure the cylinder by tightening the 2x M5 x 1” (25mm) screws.
Use a screwdriver to reattach the metal pin.
Rotate the bolt face plate back into position and pop the bolt extension cover.
Place the bolt extension cover back. Note: Select the appropriate size of the bolt extension based on the required lock length.
Tighten the bolt extension cover using the Allen key.
Step 8: Installing the CR2 battery
Use a flathead screwdriver to open the dual-function battery compartment cover. Turn the screw half a turn and press down on the latch to release the compartment.
Insert the battery release tab into the lock. Place the CR2 battery into the BLACK X device, ensuring the positive (+) and negative (-) ends align with the symbols on the battery pull tab. A beep will confirm the device is operational.
Return the battery compartment cover to its original position with the tab facing outward from the lock. Use the flathead screwdriver to turn the screw back to its locked position.
Step 9: Attaching the BLACK X Deadbolt Device
Insert the lock mechanism through the door.
Align the components with the corresponding holes on both sides of the door.
Slide the lock mechanism fully into place, ensuring it fits securely within the door structure.
Tighten the screws to secure the lock in place and ensure proper alignment and functionality.
Step 10: Identifying Door Orientation
The smart lock is installed on the inner side of the door.
Gear Positioning:
If installed on the right side, the gear should face green.
If installed on the left side, the gear should face red.
Flipping the Gear (if needed):
Flip the gear if necessary to match the correct indicator position.
Step 11: Pairing with the BLACK X App
Ensure your phone’s Bluetooth and Wi-Fi are enabled before attempting to pair.
Download BLACK X App from App store or google play.
Open the BLACK X App.
click on ‘install a new lock’.
Name Your Lock or choose a description.
Create a ‘Home’ to associate with your lock.
Choose the ‘Home’ for your lock.
While in “Discovering Nearby Locks” mode, use the Allen key to press the connect button on the BLACK X device.
When a pop-up for the correct lock appears, click “Connect” to proceed.
Congratulations! You’ve successfully connected your first lock.
Step 12: Final Assembly
Align the two parts of the lock assembly, as demonstrated in the illustration.
Rotate the assembly in the direction indicated by the red arrows to securely connect the components.
Once aligned, ensure the mechanism locks into place by rotating it slightly to confirm a tight fit.
Use the Allen key to rotate the screws clockwise and tighten them on both sides.
Tested to ANSI 156.18 and 156.40 Grade 1/A standards
Languages: English
Requirements: iOS or Android device
Remote connectivity: Apple HomeKit and Amazon Sidewalk
Account Setup
How to create your account and profile:
Download the app from the App store or Google Play.
Open the app and tap ‘Create Black ID’.
Follow the prompts to create your account and profile. Important: When registering your Black X account, provide a phone number and email address capable of receiving text messages and emails, respectively.
Enter 2-step verification code.
Enter your email and password.
Your Black X account is now activated and ready to be paired to your lock(s).
