USA Deadbolt Smart Lock

Troubleshooting Guide for BLACK X USA Deadbolt Smart Lock

Having trouble with your BLACK X USA Deadbolt Smart Lock? Don’t worry! This guide covers common malfunctions and provides step-by-step solutions to help you resolve any issues quickly and efficiently. Whether it’s installation difficulties, connectivity problems, or battery concerns, we’ve got you covered.

For a seamless experience, follow the troubleshooting section below to identify your issue and apply the recommended fix. If the problem persists, feel free to contact our support team for further assistance.

For a detailed step-by-step installation guide, refer to:
🔗 How to Install BLACK X Euro Profile Smart Lock – Step by Step

Installation Issues

 

The opening mechanism does not turn or feels jammed

 

Here are several options that can be examined:

• Ensure that the lock mechanism is fully inserted and aligned with the corresponding holes. 🔗 Refer to Step 9
• Loosen the mounting screws slightly and adjust the position of the lock. 🔗 Refer to Step 9
• Ensure the final assembly is aligned correctly and the mechanism locks into place. 🔗 Refer to Step 12
• Use the Allen key to check if the screws are properly tightened but not overtightened. 🔗 Refer to Step 12

 

The cylinder does not fit properly

 

Here are several options that can be examined:

• Measure the required cylinder length (2.36” [60mm] or 2.75” [70mm]) before installation. 🔗 Refer to Step 6
• If the installed cylinder is too short or long, replace it with the correct size. 🔗 Refer to Step 7
• Ensure the bolt extension cover is correctly positioned to accommodate the required length. 🔗 Refer to Step 7

 

The door orientation is incorrect

 

Here are several options that can be examined:

• Check the hinge position:
  • If the hinges are on the left, the door is left-handed.
  • If the hinges are on the right, the door is right-handed.
• Use the red marker for left-handed doors and the green marker for right-handed doors.

For detailed instructions, refer to Step 10 in the 🔗 installation guide.

 

---

Battery & Power Issues

 

The battery compartment does not close properly

 

Here are several options that can be examined:

• Remove the battery and ensure it aligns with the polarity symbols (+/-). 🔗 Refer to Step 8
• Reinsert the battery and press it down firmly before closing the compartment. 🔗 Refer to Step 8
• Ensure the battery compartment tab is facing outward before securing it with the screw. 🔗 Refer to Step 8

For detailed instructions, refer to Step 8 in the 🔗 installation guide.

 

The lock does not power on after inserting the battery

 

Here are several options that can be examined:

• Remove the battery and reinsert it, ensuring proper polarity.
• Try replacing the CR2 3V battery with a new one.
• Listen for a beep sound that confirms the lock is operational.

For detailed instructions, refer to Step 8 in the 🔗 installation guide.

 

 

What type of battery is required for BLACK X locks?

 

• The BLACK X device requires a CR2 battery, which is commonly used in cameras and electronic devices. 🔗 Refer to Step 7
• Battery life is up to 2 years under normal usage.

---

Connectivity & App Issues

 

The lock does not pair with the BLACK X App

Here are several options that can be examined:

• Use the Allen key to press the connect button on the lock. 🔗 Refer to Step 11
• Ensure the battery is installed correctly before attempting to pair. Confirm that you hear a beep sound, indicating that the device is powered on and operational. 🔗 Refer to Step 8
• Make sure Bluetooth is turned on in your mobile device settings.
• Wait for the pop-up for the correct lock to appear and click “Connect”. 🔗 Refer to Step 11
• If the lock does not appear, restart the app, ensure Bluetooth is enabled, and try again.

The lock is not responding to app commands

 

Here are several options that can be examined:

• Ensure that the lock is securely installed and the screws are tightened. 🔗 Refer to Step 9
• If using a Wi-Fi bridge, check that it is connected and powered. 🔗 Refer to Step 13
• Restart the BLACK X app and ensure Bluetooth is enabled.

 

---

General Information & Battery Issues

 

How do I determine the door orientation?

Here are several options that can be examined:

• Left-Handed Door: If the hinges are on the left side when you face the door from the outside, the door is considered left-handed.
• Right-Handed Door: If the hinges are on the right side, it’s a right-handed door.
• Mark Orientation:
  • Use the red marker for left-handed doors.
  • Use the green marker for right-handed doors.

For detailed instructions, refer to Step 10 in the 🔗 installation guide.

 

What type of battery is required for BLACK X locks?

• The BLACK X device requires a CR2 battery, commonly used in cameras and electronic devices. 🔗Refer to Step 7
• Battery life is up to 2 years under normal usage.

 

Where to Buy CR2 Batteries?

You can purchase CR2 batteries at various retailers, both online and in physical stores. Here are some options:

• Online Retailers:
  • Amazon: Search for “CR2 battery,” and you’ll find many options from various brands.
  • eBay: You can find new or bulk options for CR2 batteries.
  • Walmart: They have an online store with delivery options or in-store pickup.
• Physical Stores:
  • Electronics Stores: Stores like Best Buy often carry CR2 batteries.
  • Pharmacies: Chains like CVS or Walgreens sometimes stock batteries in their electronics section.
  • Home Improvement Stores: Places like Home Depot or Lowe’s usually have a selection of batteries.

Before purchasing, check the packaging for compatibility and read reviews to ensure you’re buying a reliable brand.

 

Need Further Assistance?

If you’re still experiencing issues after following this guide, our support team is here to help.

✉️ Contact us: Reach out for support and we’ll respond as soon as possible.🔗 contact here